Tesda Offered Courses for Building and Construction

If you are undecided about what tesda offered courses should you take perhaps this post will help you to make up your mind. The available courses varies on location some courses may or may not be available in the accredited schools near you. If you plan taking up courses related to building and construction. Below is the list of available courses that may be of interest to you.The list of accredited schools can be found right after it.

Tesda Courses for building and construction:

Drafting Technology Course
1-Yr Practical Electricity
Architectural Desktop (35 Hours)
Building Maintenance Supervision
Building Wiring Installation NC II
Carpentry NC II
Construction Painting NC II
Crane Operator Course
Diploma in Civil Technology
Drafting Technology (1-yr)
Fiberglass Craft
Heavy Equipment Operation (Backhoe Loader) NC II
Heavy Equipment Operation (Bulldozer) NC II
Heavy Equipment Operation (Forklift) NC II
Heavy Equipment Operation (Hydraulic Excavator) NC II
Industrial Electricity
Masonry NC I and NC II
Pipe Fitting NC II
Plumbing NC I and NC II
Technical Drafting NC II
Tile Setting NC II

Tesda accredited schools for Building and Construction:

Sta. Elena, Marikina City
Tel. 933-6790 / 682-0591

Quezon City
Abraham Dumlao Colleges of the Philippines, Inc.
No. 12 Salvia St., Saint Dominic Subd., Zabarte, Novaliches, Quezon City
Tel: 417-5105 936-0957

600 Jovan Bldg., cor Samat Mandaluyong City
TEL. 533-2117

Dual Tech Training Center Foundation, Inc.
778 Campa St. Binondo Manila

Christ the King College of Science and Technology, Inc. (Formerly Christ the King Technical School)
2/F Jaysons Bldg., No. 12 National Rd., Putatan
862-19-17, 862-6930
862-1918 fax

Uni-Cyber College of Science and Technologies, Inc.
3/F Magdalena Arcade Bldg., Palanyag Rd., Corner Evacom St., San Dionisio, Parañaque City

Tesda Las Piñas
International Elec. & Technical Institute, Inc.
3rd Flr. Navarro Bldg., Real St. Pamplona III, LP
874-47-65 / 871-4351

Las Pinas Manpower Training Center
Pulanglupa I, Las Pinas City
873-27-98 / 871-29-51

Muntinlupa City Technical Institute
Brgy. Putatan, Muntinlupa City

Dr. Sixto Ave., cor. Caruncho Ave., Pasig City
Tel. 641-5648

Brgy. Hulo Bliss, Mandaluyong City
Tel. 531-5159 / 533-2098 / 5330870

Sta. Elena, Marikina City
Tel. 933-6790 / 682-0591

Mayor Changyong St., Sta Elena Marikina City
Tel. 645-1840/ 646-1830

CPDC Training & Testing Corp.
2317- A Luna Street, Pasay City

Don Bosco Technical Institute of Makati, Inc.
Don Bosco St. cor. Chino Roces Ave., Makati City

Quezon City
Skill-Power Institute, Inc.
North Avenue cor. Agham Road North Triangle Quezon City

International Electronics and Technical Institute, Inc.
3/F Dytronics Corp. Bldg., EDSA, Monumento, Caloocan City

Pio Alvarez St. , Barangay Bambang Pasig City
Tel. 571-1098

3 Lark St., Sta Elena, Marikina City
Tel. 882-0492 / 682-3445

Guzman College of Science and Technology, Inc.
GCST Bldg., 509 Z. P. De Guzman Street, Quiapo, Manila
733-43-74 / 733-43-63/733-98-66

EL-Jars Skilled Training Center, Inc.
8418 Goodwil Subd. 2 Dr. A Santos Ave., Sucat, Parañaque City

Las Piñas
University of Perpetual Help Rizal
Pamplona III, Las Pinas City
871-06-39 loc. 202

The Fisher Valley College, Inc.
5 M. L. Quezon St., Hagonoy, Taguig
837-42-61, 839-19-03

Majestic Technical Skills and Development and Landscape Corp.
Lot 38 Maluggay Rd., FTI Complex, Western Bicutan, Taguig City

8013 Piscor Compound, Amang Rodriguez Avenue, Manggahan, Pasiig City
Tel. 382-7130

Brgy. Hulo Bliss, Mandaluyong City
Tel. 531-5159 / 533-2098 / 5330870

CPDC Training & Testing Corp.
2317- A Luna Street, Pasay City

tesda Quezon City
New Era University
St. Joseph St., Milton Hills Subd., Bgy. New Era

Phil-Best Entrepreneur Inc
Unit 34 Llnar Bldg 10th Ave cor Bonni Serrano Ave, Cubao Quezon City

John Vincent Global Skills Builders and Assessment Center, Inc.
No. 48 Jasmin St., Happy Site, Marulas, Valenzuela City

Association of Construction and Informal Workers (ACIW)
LERC-PWD Bldg, Malaria, Almar, Caloocan City

*For the list of Tesda offered courses that you may want to know from different career field kindly place it on the comment section. Then I’ll get back to you soon. :-)


  1. hi po just want to ask kung saan specific school na naka lista sa taas ang nag ooffer ng Hydraulics mechanic/technician/operator course ive tried to call som of the schools even TESDA help number and believe it or not hindi nila alam! THEY CANT HELP ME THEY JUST REFER ME TO THEIR FREAKING WEBSITE!! AND WORSE THE WEBSITE DONT TELL SPECIFICALLY WHAT SCHOOL OFFERED WHAT COURSE??? DANG! SO FRUSTRATING!

    So if you can help me I’ll deeply appreciate it thanks!!

  2. sir anything regarding hydraulics will do. Baka may alam ka na School. May it be a technician or operator. Need asap for a waiting job in Singapore. Thanks sir!

    • mattscradle says:

      Sir paki check po ito ang course na open in Heavy Equipment Operation (Hydraulic Excavator) NC II baka po yan yung hinahanap nyo.

      248 B. C. Dela Paz Street, Barangay Caniogan, Pasig City
      Tel. 381-1320

      Suite 1601 Jollibee Plaza Condominium, F. Ortigas, Jr., Ave., Ortigas Complex, Pasig City
      Tel. 631-3136 Fax. 633-4994 CONSTRUCTION
      Heavy Equipment Operation (Hydraulic Excavator) NC II

      29 C. Raymundo Ave. Brgy. Sagad, Pasig City
      Tel. No. 628-3297 / 3925947
      CONSTRUCTION Heavy Equipment Operation (Hydraulic Excavator) NC II

  3. for the schools listed above those are the schools offer carpentry course? just making sure..do u have any idea how much the training is? thanks

  4. Ma’am pasuyo po saan po yung training center na malapit s cavite or las pinas yung may building wiring installation course. tnx in advance…

    • mattscradle says:

      Hi Alex,
      Try to inquire in Las Pinas Manpower Training Center, Pulanglupa I, Las Pinas City, 873-27-98 / 871-29-51 Course available: Building Wiring Installation NC II 402 Hours

  5. Sir tingin nyo sir nsa mag kano ang Heavy equipments operator courses ? tnx.

    • mattscradle says:

      Sir pasensya na po hindi ko po kayo masasagot sa bagay na yan. Inquire na lang po kayo sa respective schools na nag ooffer ng ganyang course.

  6. jhoana tuliao says:

    sir san po b tesda accredited school offer ng adt operator?

  7. Good day!Tanong ko lang po kung saan saang school or training centers in metro manila ang may crane operator course at trailer driver operator course?
    And if you know the numbers of the instructors of this course po.
    Thank you.

  8. anung school po ba ang nag offer ng heavy equipment operator training/backhoe operator near quezon city.

  9. sir ask ko lang po kung saan school may offer ng heavy equipment operator malapit dito sa san jose del monte bulacan.thank you po

  10. Manong Imo says:

    Sir Mattscradle: May alam po akong organisasyon dito sa metro manila na naghahanap ng “trainees” sa construction trade sa loob ng 9 – 12 buwan. Ang training ay abroad. Pero ito ay training na may buwanang bayad/income o “stipend” na tinatawag at may libre pang housing. Kaso dapat nasa linya ng kurso nila yung construction trade. Anong kurso po ba ang nasa linya nito? Kasi dun po babasehan din ang interview nila sa Embassy. Magandang tulong ito lalo na sa kagagradwet lang para madagdagan lalo ang kanilang kaalaman at maging mas “attractive” ang mga resume nila kung may training sila na ganun na sa ibang bansa pa ginawa. Pwede niyo ipadala sa email add ko ang ibang contact details mo po? Kung OK lang po. Maraming salamat po.



  12. Shane Gazmen says:

    Maam, Good day po, saan po malapit na training center dito sa antipolo ang crane operator at ilang months po and magkano po ang tuition. Hope you reply maam. Good day.

  13. estong ejercito says:

    gud day po sir, ask ko lng po kng saan malapit na tesda training d2 sa cavite, ung available ang forklift operation training? salamat po and godbless!

  14. Thanks po ill try to contact these institutions you gave me. I really appriciate your response. More power and God Bless po!

  15. Gdmrning!
    Hi! I just want to ask if the CPDC Training and Testing – TESDA Pasay is still existing until now?


  16. ask ko lng po kng saan may malapit na training center for crane operator d2 sa may tandang sora quezon city,,,tnx po,pls i need an answer…asap

  17. Good day po… sir pwde po bang patulong paki info naman ako f where ako pwede mag aral o mag master gumamit ng forklift. Preparebly near sa Laguna o cavite area, may experience na rin naman ako during may schooling sa AFP LOGISTIC COMMAND but matagal na panahun na un nalimutan ko na mga teknik. thats my 1st, and 2nd choice sana e warehouseman were po tau pwdeng mag aral at matuto, may expirience ako sa military installation but its not enough sir.
    Thank you very much to all of you to sa walang sawang pagtulong sa tulad naming military personnel. mabuhay tayung lahat.

  18. Hi Mam,
    Just want to know if there are short courses for heavy equipment mechanic? and where.. preferably in parañaque city.. thank you..

  19. myra v. ignacio says:

    gud day…we have operators of heavy equipment who are require to have a certificate as requirement in LTO for restriction 8…please help to send us list of accredited school or agency which handle training/seminar…thank you so much.

  20. sir..good day ask q lng po qng saang tesda my offer ng basic safty course na malpt sa muntnlupa…? ty


    good day sir., ask ko lang kong saan ako pwide makapag training ng crane operator course na free..thanks very much…

  22. delos santos crisanto says:

    sir, ask ko lang po kung san pwede mag training for carpentry nc II. kasi tumawag ako sa tesda eh walang specific na answer. salamat po.

  23. jenelyn calzado says:

    good day po! ask ko lang po sana kung may traing po ng computer literacy about MS Excel, Powerpoint, and internet explorer sa bulacan? ask ko din po kung ilang day po usually ang inaabot ng training? thanks po….

  24. kelan poh enrollment ng pipe fitter?…paranaque area lng poh…

  25. sir offered po sa tesda and BARISTA, kung available anong school po?

  26. Luis Pambid says:

    Gud a.m. Where can I study basic carpentry? Yong Tesda accredited. How long and how much do I spend? Thanks.

  27. rowena venzon says:

    Gud evening, I would like to know where can i find an assessment training for technical drafting here in manila this may? thank you

  28. charles says:

    Gud evening, I would like to know where can i find ,Heavy Equipment Operation (Forklift) NC II training school here in cavite? waiting for reply.,., thank you ang god bless.,

  29. dindo sanchez says:

    I would like to inquire about 1) trouble shooting-tune up, overhaul & repair
    2)welding. I leave here at Batasan Hills, QC. Saan malapit dito ako maaring makaapply? How much ang fees? Ilang months and training? Thanks

  30. good day!…..meron po bang training school for plumbing malapit po dito sa mapulang lupa valenzuela city?

  31. meron po bang school for heavy equipment operator malapit sa makati

  32. mark l paje says:

    how long po ba ang building wiring installation? magkano po ang magagastos? 3years n po akong electrician pero kelangan ko pong mkapag arl para magkaroon po ng certificate.

  33. rene vista says:

    meron akong inaaplyan sa singapore bilang isang warehousemen.. kaso kailanagan daw nila ng certificate na katunayan ikaw ay isang warehousemen d2 sa pinas.. ang tanong ko po ay: nagbibigay po ba kayo ng certificate kc po matagal na rin po akong nagtrabaho d2 sa manila bilang isang warehousemen, kung meron po testing or training facility sa tesda pwede po ba ako mag training kung meron po… pls reply po.

  34. sir san po ba ako pwedeng mag training aside from Tesda Taguig medyo malayo from my house kasi in Grace Park, Caloocan. About heavy equipment, Payloader operator training. Meron akong nakita one in Caniogan, Pasig pero baka meron ka pang alam na mas malapit. Salamat, and hoping from your reply soon!

  35. Jesus C. Ong Jr. says:

    Is there any training schools hear in batangas for heavy equipment operation? What is the schedule of the training and how much is the corresponding fees. thanks po..

  36. emmanuel san diego says:

    good morning, gusto ko pong mag training ng heavy equipment operator dito sa Q.C., meron po ba ditong training school sa Q.C., magkano po ang training fees? thank you

  37. Leo L.Arnesto says:

    hi!i’m looking for tesda accrideted traing center here in metro manila for plumbing.coz i’m applying abroad as plumber but i have no certificate.i’m already working here in manila as plumber for over 4yrs.pls help me…..
    thank you!

  38. al-francis segovia says:

    i would like to know where to find a crane tower school here in manila because i want to learn that course and get a job

  39. dante de leon budas says:

    Good day po sa inyo sir!may may crane operetor training center po ba sa paranqe?ilang araw po ang training at magkano po ang bayad.ofw po ako dito at gusto kung mag training pag uwi ko.hoping for your reply and God bless you sir.

  40. jake pegollo says:

    good day po sa inyo, san po ako pwede kumuha ng tesda training for forklift operator na medyo malapit sa cavite? at ilang araw po ang training at magkano po ang bayad don, maraming salamat po…

  41. luis obsequio says:

    sir. god day poh may training school din poh b sa albay ng heavy equipment operator at crene operator

  42. luis obsequio says:

    d2 sir sa batangas may training school b ng heavy equipment operator

  43. wing bactong says:

    Hi mayron po bang hydraulic mechanic training sa pasig tesda na acredated

  44. virgilio mofan says:


    good day po sa inyo. tanung kulang kung saan pweding mag training ng heavy equipment operator . na malapit sa cabuyao laguna… at magkano kaya ang bayad? maramin salamat po.

  45. Josefina Agarpao says:

    would like to know if you have computer tech course at Dualtech Binondo, Manila.
    kindly furnish address and telephone numbers where I can inquire too.

  46. reginald san pedro says:

    hi meron po ba dito sa manila or quezon city para sa forklift operator

  47. reginald san pedro says:

    meron po bang training school for buther dito sa quezon city

  48. Joemari Baticolon says:

    could you recommend schools na nag ttrain ng mga crane and other heavy equipments opetator. Yung trusted

  49. paulo hibay says:

    meron poh ba sa batanggaz na course ng building wiring instollation? at ilang months poh ba ang training?

  50. nelbert d ascarez says:

    h! Sir/maam magandang araw po. Plano ko po kasing mag.aral ng industrial electrical. Tonong ko lang po sana kong saan ako pwidi na malapit d2 sa quizon city. At ang number na pwidi kong matawan. Maraming salamat po and god bles..

  51. Josel N. Respall says:

    Hi Sir/ Maam. a blessed afternoon po sa inyo. ask ko po can u recommend to me kung saang tesda school po may English proficiency Course near in Pasig City? I’m planning to learn in English proficiency po. Thanks po God Bless u richly.

  52. mau pantaleon says:

    Good day! where can i find plumbing nc1 and nc2 tesda accredited schools here in makati? Plan ko po kasi na mag-aral..? Thanks!

  53. Jay Mallari says:

    Good morning sir,,may i know if you have mechanical or electrical course and if you have when you started to study/training and how many days to study/training and how much i will pay..thank you and god bless..

  54. wilfredo l. raro jr. says:

    san po ba pwedeng magtraining for crane operator?

  55. Good day Sir,

    May I know more details on where can I apply to learn about Industrial Electrician and Building Wiring Installation Somewhere near in Pasay or Ortigas. And requirement to fill up for scholarship because I’m an OWWA member Ex-OFW.

  56. ulysis valerio says:

    gooday sir ask ko lng po kong meron din kaung crane operator training sa bulacan area at ilang buwan po ba ang training then may hands on po ba salamat po

  57. What courses are you offering for Pasig? and where is this going to be.
    will appreciate a response.

  58. Deolito Piamonte says:

    Sir magkano po ba usually bayad sa training for mobile crane operator

  59. sir tanong ko lang po,, saan ba pwiding mag training ng forklift operator

  60. Angel S. Basan III says:

    Hello Good day! Ask ko lng po sana kung saan pwede pumasok ng carpentry at house painting short training course? Hope to hear soon. Thanks

  61. hello. i wanted to have a CAD CAM operation NC II certificate from tesda. im willing to enroll in any training school here in NCR offering this course but cannot find any in the net. what is the process to obtain this? please help, t
    hank you.

  62. Rowin Valencia says:

    Hi Good Day! how many months po ang training for Crane operator and saan po pwede mag training na pinaka malapit if coming and living from part of Zambales province. Thank you…

  63. saan po ba pwede kumuha ng carpentry training sa NCR or CAR ?


  64. Antonio Sabalberino says:

    Ask ko lang po kung saan pwede mag-enroll ng Plumbing NC I and NC II, at ilang session po. At magkano po yong fee. Thank you po.

  65. Antonio Sabalberino says:

    Ano po yong requirement ng Plumbing NC I and NC II

  66. askq lng poh kung san poh d2 xapranaque ang trainingcenter ng forklift operator?

  67. gud am po mam/sir meron po bang crane operator training center sa bataan thnks

  68. sir san po ba mi malapit na driving lessons for (bus/forklift) dito sa mi las piñas? thanks ..

  69. Sir gudam..Saan pong branch ng TESDA ngayon available ung Heavy Equipment Operation( Backhoe Loader & Bulldozer) NCII

  70. san po my forklift operation.wla dw po s tesda taguig

  71. Leilanie Millan- Cid says:

    Hi! I have been a graduate of Cosmetology in one of TESDA’s accredited schools here in Novaliches. For the past ten years, I have been hiring TESDA students and graduates in my salon and spa, located in Novaliches. THis is my way of helping fresh Cosmetology graduates. This is also my way of reciprocating the blessings I have received through the years.

    We would like to invite all interested Cosmetology students and graduates. MODELO Salon & Skin Centre is currently looking for all around beauticians. Preferably female, single, not more than 25 years of age, @ least living near or within Novaliches or Caloocan areas, patient, hardworking and willing to be trained in all areas of a salon and spa services.

    If you think you are the right person for the job, kindly submit your detailed resume/ bio data in our shop. Come in a smart- casual attire. We are located right in the heart of Bayan. Our address is MODELO SALON & SKIN CENTRE, Ground Floor, MODELO Building, #23 Austria St., Nova- Town Proper, NOvaliches, Quezon City. You may contact us for inquiries @ 4195880. Look for Ma’am Leny, Miss Liza or Miss Janet.

    Thank you, Mattscradle. May our good Lord continue to shower you with His bountiful blessings, today and in the years to come.

  72. james tanael says:

    Sir, i am looking for tesda accredited assessment cenyer for technical drafting nc II or even AUTOCAD NC II, requirement kasi ng DepEd,.thanks

  73. rosendo domingo says:

    san po ba pwedi kumuha ng nc11 building electrician , 1995 pa po ako electrician sa field construction. west rembo po ako nakatira mag kanu po ba babayaran ko sa exam nc11.

    thx po.

  74. maricris almarez says:

    i would like to ask where to take drafting technology
    im near cainta po..marikina ang pasig are both good but what school is much nearer im currenty working po in corporate center pasig along julia vargas
    and i would like to take some course in TESDA thank you in advance,
    have a nice day and GOD bless!!

  75. edward dacula says:

    hello po,ask ko lng po, san po ba ako makaka enrol na libre na electrical wiring,kaylangan ko po kc sa pag apply sa mga building sayang naman po ung special skilled ko sa kuryente,nakakahawak po ako ng 220 volts na kuryente,nais ko po sanamag enrol ung medyo maiksing panahon lng po,may mga anak n po kasi ako,kaya kaylangan ko rin po mag service sa araw araw…saalamat po sana mainform nyo po ako…. god blees to all.

  76. jovi tegio says:

    sir alin po ba dito sa pasig meron construction painting nc II, yong pwede ma accredit to work abroad? thank po’

  77. harrygere endino says:

    Mam / Sir,

    Tanung ko lang po sa visayas po ba may training school din para sa heavy equipment operator at driver ng trailer po.

    Ty Po..

  78. john christopher apostol says:

    sir/ma`am can ask if may available na grader operator and then san po ako pwede mag enrol at ilang hours po

  79. Aurea Coronel says:

    good afternoon po… ask ko lang po sana f saan po merong training ng heavy equipment mechanic??/ I’m from Malabon City ano po yung pede na malapit namin pag training center..thx..god bless….

  80. kakainis mga inquiries dito, humaba tuloy dahil sa mga walang kakwenta-kwentang tanong. PUEDE BA, BASAHIN NYO MUNA yung mga nakalistang school sa taas at mag-effort naman na tawagan yung mga NUMBERS na nakalagay dun. May mga location din yung school kaya dapat wala nang nagtatanong pa kung alin ang malapit sa bahay nila, MARYOSEP! Sana ang tinatanong nyo kung alin sa mga school na yun ang lehitimo at ang existing pa. antagal na kaya ng blog na ito, 2011 pa! MAG-EFFORT MAGBASA, WAG LANG BASTA NAKA-ASA!

  81. john Cheong says:

    I just want to know kung saan may courses on carpentry, painting and plumbing and preferably sa Quezon City. Thanks!

  82. San po kaya merong tesda na inooffer ang civil technology? Tagacainta po kse ako, kung mayroon po sanang malapit.. civil technology po ba ang civil technician? Gusto ko po kse maging civil technician. Salamat po ng marami

  83. joevert oseo says:

    hi sir maam,

    sir i need to training this course pls rply the add below the details

    Heavy Equipment Operation (Forklift) NC II

  84. josea raja says:

    Pagkaba nakatapos ng civil technology ay maaari ng maging construction o maintenance foreman? Saang tesda accredited school ba sa san jose del monte city, bulacan o malapit dito puwedeng mag-aral ng kursong ito at gaano katagal? Thanks po.

  85. raymund jolloso says:

    Good Day.. Ask lang po sana ako if saan po may mas malapit na training center na nagbibigay po ng heavy equipment operation(forklift NCII) location ko po santa rosa laguna.


  86. gd morning po,.tanung ko lang sana maam kong my tower crane operator ba malapit sa paranaque? desidedo po ako mag aral tnx po

  87. a very informative post. tnx!

  88. to marvs,
    schools that offer hydraulics course: meralco foundation, dualtech binondo, tesda taguig.


  89. Staplewire says:


    I will retire 5 years from now. I want to put my retirement money (lumpsum) sa isang bagong bahay that I personally want to build (design and supervision, not the actual mason, carpentry, painting works and others).

    To accomplish this, gusto ko sana kumuha ng training about basic construction work para alam ko kung tama ang ipapagawa kong bahay. What is (are) the courses that I should get to accomplish this goal?


Speak Your Mind