TESDA Machining Course: Tuition Fee, Duration, Requirements, and Schools

TESDA Machining Course refers to Metals and engineering training for someone to become a Machinist.

TESDA Machining Course, also known as Machining NC, covers lessons about performing bench work, milling workpieces, grinding workpieces, shaping workpieces, and repairing workpieces.

The Machining Course teaches students about workplace communication with colleagues, teamwork, workplace problem solving, workplace innovation, decision making, following occupational safety and health standards, following environmental work standards, interpreting drawings and sketches, performing workpiece measurements, and performing workplace housekeeping.

The Machining Course offered by TESDA’s accredited schools has 3 levels: Machining NC I, Machining NC II, and Machining NC III.

tesda machining training

How much is the Tuition Fee for TESDA Machining Course?

The Tuition Fee for TESDA Machining Course is between 7100.80 Pesos and 12350.80 Pesos (128.07 USD and 222.76 USD) per student.

The tuition fee depends on the school offering the Machining Course, equipment, tools, and training duration.

How much is the Assessment Fee for Machining Course?

The Assessment Fee for Machining Course ranges from 500.00 Pesos to 2252.00 Pesos (9.02 USD to 40.62 USD) per candidate. There are 10 candidates per assessment per batch.

How long is the TESDA Machining Course?

The Duration of the TESDA Machining Course ranges from 337 Hours to 1590 Hours (84 Days to 398 Days) (4 Months to 20 Months), the number of days and months is calculated at 4-hour sessions per day. The duration of training depends on the training center’s class schedule.

What are the Requirements for Enrollment in TESDA Machining Course?

The Requirements for Enrollment in TESDA Machining Course include being able to read and write, perform basic mathematical calculations, communicate in writing and verbal, and be physically fit.

The school asks enrollees for additional Requirements such as a high school diploma, applicable work experience, birth certificate, marriage certificate, photo ID, barangay clearance certificate, and long brown envelope.

Requirements refer to minimum qualifications that students must meet and documents that must be submitted to the school to register for the TESDA Machining Course.

List of TESDA’s Accredited Training Schools for Machining Course

TESDA’s accredited training schools for Machining Courses are in Davao City, Cebu, Bulacan, Cavite, Pangasinan, Laguna, Iloilo, Manila, Las Piñas City, and Caloocan. Here is a list of TESDA’s accredited training schools for Machining Courses.

School Name: Cagayan De Oro College, Inc.
Address: Max Suniel Street, Carmen, Cagayan de Oro City
Contact Details: 0926-2920-483
Course Name: Machining NC I, Machining NC II, Machining NC III

School Name: Center for Industrial Technology & Enterprise (CITE) Technical Institute, Inc.
Address: San Jose, Talamban, Cebu City
Contact Details: (032) 346-1611
Course Name: Machining NC I, Machining NC II

School Name: Cor Jesu College, Inc.
Address: Sacred Heart Ave., Digos City, Davao del Norte
Contact Details:
Course Name: Machining NC II

School Name: Don Bosco (Pasil) Youth Training Center Inc.
Address: L. Flores St., Pasil, Cebu City
Contact Details: (032) 261-0010
Course Name: Machining NC II

School Name: Don Bosco Boys Home, Inc.
Address: Cotcot, Liloan, Cebu
Contact Details: (032) 517-3851
Course Name: Machining NC II

School Name: Don Bosco Technical College, Inc.
Address: No. 736 Gen. Kalentong, Pag-asa, Mandaluyong City
Contact Details: 8531-8081 to 85
Course Name: Machining NC II

School Name: Don Bosco Technical College-Cebu, Inc.
Address: Zodiac Drive Pleasant Homes Subdivision, Punta Princesa, Cebu City
Contact Details: (032) 2732302
Course Name: Machining NC I, Machining NC II

School Name: Don Bosco Technical Institute of Makati, Inc.
Address: A. Arnaiz Ave. cor. Chino Roces Ave., Makati City
Contact Details: 817-5807
Course Name: Machining NC II

School Name: Don Bosco Technical Institute of Victorias, Inc.
Address: VICMICO, Victorias City
Contact Details: (034) 3992777
Course Name: Machining NC I, Machining NC II

School Name: Jacobo Z. Gonzales Memorial School of Arts and Trades
Address: San Antonio, Biñan, Laguna
Contact Details: (049) 511-8059
Course Name: Machining NC I

School Name: MFI Polytechnic Institute, Inc. (formerly: MFI Foundation Inc.)
Address: MFI Bldg., Ortigas Ave., Barangay Ugong, Pasig City
Contact Details: 8634-4970
Course Name: Machining NC I, Machining NC II, Machining NC III

School Name: Regional Manpower Development Center
Address: RMDC, Brgy. Rebuken, Municipality of Sultan Kudarat, Maguindanao
Contact Details: (064) 429-0091
Course Name: Machining NC II

School Name: Regional Training Center
Address: Brgy. Abucay, Tacloban City
Contact Details: 321-8249
Course Name: Machining NC II

School Name: Regional Training Center – Baguio City
Address: 133 Magsaysay Drive, Loakan Road, Baguio City
Contact Details: (074)424-8723
Course Name: Machining NC II, Machining NC III

School Name: Regional Training Center – Iligan
Address: Barangaay Maria Cristina, Iligan City
Contact Details: (063)2236541
Course Name: Machining NC I, Machining NC II

School Name: Regional Training Center – La Union
Address: TESDA Regional Office No. 1, Catbangen, San Fernando City
Contact Details: (072) 242-5584
Course Name: Machining NC I, Machining NC II

School Name: Regional Training Center – X (Tagoloan)
Address: PHIVIDEC Tagoloan, Misamis Oriental
Contact Details: 0915-400-1175
Course Name: Machining NC II

School Name: Regional Training Center Central Luzon – Guiguinto
Address: Mac Arthur Highway, Tabang, Guiguinto, Bulacan
Contact Details: (044) 794-0024
Course Name: Machining NC I, Machining NC II, Machining Technology (Bundled program in Machining NC I and NC II)

School Name: Sisters of Mary Technical Education Institute Cavite Inc.
Address: Boystown, Brgy. Adlas, Silang, Cavite
Contact Details: (046) 865 2830
Course Name: Machining NC I, Machining NC II

School Name: Zeal Skills Training and Assessment Center, Inc.
Address: Quezon Avenue, Brgy. Poblacion 8, Midsayap, Cotabato
Contact Details: 9472516140
Course Name: Machining NC II

School Name: Xavier University
Address: JCA Technology Complex, Masterson Avenue, Upper Carmen, CDOC
Contact Details: 850-4901-02
Course Name: Machining NC II

School Name: University of Southern Mindanao
Address: Sudapin, Kidapawan City
Contact Details: (064)288-1624
Course Name: Machining NC II

What are the Jobs for TESDA Machining Course Graduates?

The Jobs for TESDA Machining Course Graduates are Machinist including Machinist Helper, Bench fitter, Lathe machine operator, Milling machine operator, Grinding machine operator, and Shaper machine operator.

Which Countries Have Job Openings for Filipino Machinists?

The Countries that have Job Openings for Filipino Machinists include Fiji, Australia, Canada, Japan, New Zealand, United Arab Emirates, Malaysia, Saudi Arabia, Marshall Islands, and the United Kingdom.

in TESDA



error: Content is protected !!